ACI Northwest Blog: Posts Tagged ‘Thermostats’

Why Proper Thermostat Placement Is Crucial for Your Heating System

Monday, March 24th, 2014

The thermostat does more than control when your heater’s blower motors and heating elements turn on and off. It also monitors the temperature in your home using sensors and uses the information to guide its programming. This is the main reason why having the thermostat in the proper place is crucial for receiving the correct level of comfort in your home; poor placement will mean a heater than runs too often, runs too little, or runs erratically.

If you received a poor heating installation, you may have an improperly located thermostat. In most cases, the only solution is to call up a skilled Hayden, ID heating service technician to move it to a better location. ACI Northwest can assist your with thermostat problems when they begin to affect your heater’s performance.

Here are three incorrect thermostat locations:

WRONG: In a place with too much direct sunlight

If a thermostat sits in too much direct sunlight, it will sense a temperature on average 10°F higher than the room’s temperature, a “ghost reading.” This will lead to a heating system failing to turn on when it should.

WRONG: Near to windows and doors that open to the outside

If a thermostat is near any spot that can receive outdoor drafts, it will register temperatures lower than the room’s actual temperature. This ghost reading will have the opposite effect of the sunlight problem: it will cause the heating to come on before it should, resulting in a stuffy, uncomfortable environment.

WRONG: Located too far from the center of the house

You want a thermostat to register a median temperature for a home so it supplies the right amount of heat to create even warmth. A thermostat located too far from the center of the house will detect outlier temperatures that inaccurately reflect the general temperature, and this will result in uneven heating.

(USUALLY) RIGHT: Outside the master bedroom

This is one of the theoretically ideal spots to install a thermostat, since the master bedroom is usually located at the center of a house, and is not near to drafty doors and windows or direct sunlight. If the master bedroom isn’t ideal, it will at least offer a starting point for finding a good spot.

Re-locating a thermostat takes technicians skilled with heating and electrical wiring. Make sure that you find an experienced company like ACI Northwest to locate the best place to move your thermostat. We have a combined 85 years of experience bringing our customers optimal heating in Hayden, ID.

Continue Reading

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Friday, November 4th, 2011

If the temperature in your Cheney home is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Continue Reading

New Thermostats – Are they Worth the Investment? A Question From Sagle

Wednesday, September 21st, 2011

When you are trying to save money around your Sagle house, a new thermostat is definitely worth looking into. Sure, your old thermostat works fine. But there are a lot of features available on newer models that can help you save money on your heating and cooling costs throughout the year.

And you do not need to wait until it is time to replace your home comfort system to upgrade your thermostat. Most thermostats can work with many different types of heating and cooling systems. So no matter what type of HVAC system you have or how old it is, you should be able to integrate some type of new thermostat into it.

But how can a new thermostat save you money? Well, they simply offer a lot of features that you can use to your advantage. For instance, even the most basic programmable thermostat can let you set different temperatures for different times of day. You can program the thermostat to turn the heat down during the day when no one is home and then you can have the heat switch back on just before you get home.

That way, you can come home to a nice, warm house without having to pay to heat it all day long when it is empty. Many newer thermostats also are more accurate and can provide more pinpoint control of your heating and cooling system. That means that you will not be wasting money because your heating system gets the actual temperature in your house up to 75°F when you only really need it to hit 72°F.

Newer thermostats help you to save money in a variety of ways, and that savings will more than pay for the cost of having a new thermostat installed. That is because thermostats are actually quite cheap and easy to install. A relatively basic programmable thermostat should not run you more than $100, and even if you opt for one of the more advanced systems out there, you will not pay more than a few hundred dollars.

That is a small price to pay considering the increased comfort possible with a state of the art thermostat and the potential for savings every month on your heating or cooling bills. Plus, you likely paid a considerable amount to have that state of the art HVAC system put in. It is worth paying just a bit more so that you can get the most possible out of it.

Continue Reading

Installing Automatic Thermostats – Quick Fix to Energy Savings in Harrison

Wednesday, September 14th, 2011

While you probably spent a lot of time researching your Harrison home heating and cooling system to make sure you got one with great energy efficiency ratings and all of the other features you were looking for, one thing you may not have thought a lot about is your thermostat. The thermostat in your home is your direct link to your home comfort system, and the type and quality of the product you have in place can have a much bigger impact on the performance of that system than you may initially realize.

Of course, any thermostat will get the basic job done. You set it for the desired temperature and it will communicate that information down the line to the heating and cooling system. But the better the thermostat you’re using, the better the communication and coordination between the two devices will be. And many advanced thermostats come with all types of special features that can both enhance the quality of your indoor environment and save you some considerable money in the long run.

Saving Money with a New Thermostat

So how can a thermostat save you money? There are actually a couple of ways. For instance, an automatic thermostat can be programmed to switch your heating and cooling system on and off at different pre-set times of day. That means you can have the heat or air conditioning turned off during the day and still come home to a comfortable house. Simply set the thermostat to come on right before you get home and you’ll be able to walk into a perfectly temperature controlled environment without having to keep the heat on all day.

Automatic thermostats can come with other great features as well. For instance, some of them are equipped with zone control, so that you can set them up to maintain different temperatures in different parts of your home. That way, your home comfort system doesn’t have to work harder to keep your whole house warm or cool when only part of it is in use. And when your home comfort system is working less and using less energy, it will last longer so you won’t have to pay for repairs or a new system nearly as frequently as you might otherwise.

You’ll also pay less on your monthly energy bills the whole time, adding up to a great deal of savings. It might never have occurred to you that a new thermostat could save you so much money, but with all of these benefits, it’s definitely worth looking into.

Continue Reading