ACI Northwest Blog: Archive for the ‘Services’ Category

Airway Heights Heating Guide: How to Make Your Heating System More Effective

Friday, January 20th, 2012

Everyone wants an effective heating system in Airway Heights– one that will provide steady, reliable heat without you having to spend hundreds of dollars each month on gas, oil or electricity. And while the best way to improve the efficiency of your heating system in most cases is to upgrade it, there are some simple things you can do around the house to boost its effectiveness. Here are some of the best:

  • Rearrange Furniture – Just having the heat on doesn’t necessarily ensure the heat entering your room is being distributed evenly. Move your furniture in such a way that there is a clear, unimpeded path from the registers and radiators to the rest of the room. Done properly, this will make it much easier to and faster to heat every room of your house.
  • Maximize Air Flow – Air flow can be maximized in a number of ways. Make sure you close any windows near a register or radiator and that you remove any large objects that might block air flow. You should also install things that can help move air like fans and always call someone in for changes to the arrangement of your vents or radiators.
  • Clean Registers or Radiators – The cleaner your radiators or dust registers are, the more efficiently they release their heat. Not only have that, but clean radiators and registers resulted in better indoor air quality. Weekly cleaning of each room’s heating source is highly recommended.
  • Install Ceiling Fans – Ceiling fans switched to blow down are incredibly effective for distributing air throughout the room. This will keep push warm air down and keeps cold air up – in effect, reducing the need for constant running of your furnace or boiler.

Effective heating is important to keep your home comfortable, reduce the cost of heating and prolong the lifespan of your furnace or boiler. You should also make sure your heating system is properly maintained throughout the year. Skipping maintenance visits (which are highly recommended annually) will put unnecessary stress on your system and shorten its lifespan substantially, not to mention the decrease in efficiency when heating your home.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Airway Heights Heating Guide: How to Make Your Heating System More Effective

Sagle Heating Replacement Tip: Signs of an Oversized Furnace

Wednesday, January 18th, 2012

Most people in Sagle, when they choose a new furnace, think that “bigger is better”. However, an oversized furnace can present just as many if not more problems than an undersized furnace. So, if you feel you may have overdone it in the past or you want to avoid making a mistake in the future, here are some signs that your furnace may be oversized.

Short Cycling

The most common sign of oversizing is short cycling. Short cycling occurs when your furnace turns on and off frequently because it reaches the thermostat setting so fast. Basically, your furnace is so powerful that it can produce what you need rapidly and then shuts off. But, because it does this, the temperature in your home is likely to cool much faster as well since the furnace isn’t on all the time.

Additionally, the on and off short cycling has a negative effect on your furnace, causing excess wear and tear on the system and eventually leading to extra repairs and in some cases early replacement.

High and Low Temperatures

When your furnace is turned on for a comfortable indoor temperature like 70 degrees F, the high and low temperature between cycles should be relatively close to that temperature. In an ideal situation, you shouldn’t even notice a fluctuation.

So, if the high temperature gets close to 75 degrees F and the low temperature is around 66 degrees F, you have a furnace much too large for the size of your home.

Furnace Room Issues

You might find that the space and exhaust given for the furnace are not sufficient either, especially if your previous furnace was replaced with this oversized unit. Backflow of a gas or oil smell or excess heat in and near your furnace room are both common signs that the furnace is much too large.

So, what should you do about your oversized furnace? If you have had that furnace for some time or just moved into a new home, it’s a good idea to have a new one installed. Have a proper load calculation done and then get a new furnace installed so you don’t have to worry about the system cycling on and off so often. If it’s a newer unit, call your Sagle heating technician and discuss possible options to reduce the negative effects of the miscalculation of its size.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Sagle Heating Replacement Tip: Signs of an Oversized Furnace

Happy Martin Luther King Day from Your Local HVAC Contractor!

Monday, January 16th, 2012

Happy Martin Luther King Day! This holiday is not just about celebrating civil rights but also about serving your community. If you have the day off today, why not try spending it helping others? From volunteering at an animal shelter to helping the homeless, there are hundreds of ways you can make your community a better place to live. Have a great holiday!

Continue Reading

Tags:
Posted in Services | Comments Off on Happy Martin Luther King Day from Your Local HVAC Contractor!

Bayview HVAC Contractor Guide: Essential Components of a Home Comfort System

Friday, January 13th, 2012

Indoor comfort is defined by several factors: temperature, humidity, and air quality. If any one of the three is out of the “normal” range it can affect the quality of life in your Bayview home.

The ultimate goal of any heating & cooling contractor is to ensure that customers are comfortable – meaning that all three factors are addressed when servicing, replacing, or installing new equipment in a home. This equipment includes furnaces and air conditioners but also extends to humidifiers, dehumidifiers, electronic filters, ultraviolet (UV) lighting, infrared heating, etc.

Obviously, the essential component for most U.S. households is a furnace. Air conditioners may not be essential for all parts of the U.S., namely the northern states, but are still considered an integral part of any home comfort system. Add-ons like de-humidifiers and electronic filters are important for controlling the air quality.

Let’s look at the furnace first. There are several choices but most can be found in two different classifications: single-stage or variable speed two-stage. Your choice depends on the indoor square footage, your own comfort needs, and possibly the cost of energy units (gas or electric for example). Forced air is a common method of moving heated air to all parts of the home via an air handling unit and through a duct system. But gaining in popularity is radiant heat (electric), which does not utilize a duct system.

Air conditioners also come in a variety of sizes, including window/room air conditioners or central air conditioning, which is likely a “split” system including an outdoor unit and indoor coil. The size of the air conditioner is determined by square footage, which is part of a load calculation performed by qualified heating & cooling contractors while planning the equipment replacement or new installation. An oversized air conditioner may produce high humidity levels and an undersized unit may not provide enough cooling to all areas of the home. High humidity levels contribute to higher indoor temperatures in the summer, and can also lead to respiratory problems.

If someone in your home has allergies or is sensitive to certain pollutants in the air, it may be important to include extra filtration in your heating & cooling system, such as electronic filtration and UV lighting mounted in the buildings duct system, to kill germs and contaminants.

And speaking of an essential component, duct systems are keys to maximizing efficiency and comfort. Properly sized, insulated, and sealed, the duct system is a key to comfortable, healthy indoor air – and energy efficiency. It is also important to keep your duct system clean, too.

As always, it is best to consult with a licensed Bayview heating and cooling contractor who can offer the best solutions for your home comfort system.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Bayview HVAC Contractor Guide: Essential Components of a Home Comfort System

Heating Installation Guide: What to Expect in a Low, Medium or High Efficiency Furnace

Wednesday, January 11th, 2012

When buying a new furnace in Deer Park, you have many options. You can purchase a low end model to save money up front and you’ll still get exceptional fuel efficiency, but as you go up the scale, more innovative, money saving features become available. Here is a brief look at what you can expect based on which type of furnace you purchase.

Low Efficiency Furnace

This is a bit of a misnomer as even entry level furnaces have efficiency ratings of at least 80%. For comparison, if you’re still using an old gravity furnace, your efficiency rating could be lower than 50%. Modern furnaces are built to conserve, and while you won’t receive all of the bells and whistles that tend to accompany high efficiency models, you will get a durable, affordable furnace that will last a long time.

Medium Efficiency Furnaces

Furnaces in the mid-efficiency range have AFUE ratings of between 85% and 92% and are therefore significantly better than those in the entry level range. They also have some of the higher end features available in high efficiency models like programmability and the option for zone control. Because they are still mid-range, they are affordable without skimping too much on features too – a must for any homeowner wanting to save money on both ends.

High Efficiency Furnaces

The highest efficiency furnaces on the market are very different from those you would have purchased even just 10 years ago. Top end furnaces can carry AFUE ratings of up to 95% with a boat load of added features to conserve energy. These features include two stage gas valves so you can maintain a low BTU heating system for most of the year but crank up the heat when the temperature outside drops too low. They are also programmable, which allows you to easily change the temperature settings, fan speed and more from anywhere in the house.

And while they cost more to install, high efficiency furnaces use less energy over their lifespan, last longer and are more environmentally friendly than any other furnaces on the market in Deer Park today.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Heating Installation Guide: What to Expect in a Low, Medium or High Efficiency Furnace

Tankless Water Heater Tip: How to Get the Right Size

Monday, January 9th, 2012

Tankless water heaters are gaining popularity among Cheney homeowners because of their on demand hot water supply and space-saving design. Although they are more expensive than traditional tank water heaters, on demand water heaters are more efficient, reliable, and easier to install and maintain. Before choosing to install a tankless water heater, however, you will have to decide which size will meet your hot water needs.

Rather than storing hot water in a tank, the tankless models heat the water with individual units located near the application where hot water is needed, such as a shower or washing machine. For larger homes, some of these smaller units cannot heat enough water for several applications running at the same time. You can also install a single tankless water heater for the entire house, or separate ones for appliances that use more hot water.

Finding the proper size and type will depend on the flow rate—measured  by a GPM (gallons per minute) number—that each fixture needs. Every application has a standard flow rate that must be added up in order to calculate the hot water demands for your entire home. For instance, if someone is using a sink with a 1.5 GPM at the same time another person is running a shower with a 2.0 GPM, the flow rate for the tankless unit would need to be at least 3.5 gallons per minute. You will have to add up the flow rate for all the applications in the house to get the minimum GPM figure for your tankless water heater.

In addition to flow rates, tankless hot water heaters are also measured by how much the water temperature needs to rise as it moves through the heating unit. You can determine the temperature rise for each application by subtracting the temperature of water coming in from the desired temperature going out. Once you add those together with the overall flow rates, you will know which tankless water heater can handle your overall hot water needs.

Before you buy an on demand hot water heater, it is best to talk to a professional installer. While the flow rates and temperature rise for most household appliances are fairly standard, these numbers can vary because of several factors that professionals are trained to calculate. Size is not the only factor to consider when shopping for a tankless water heater. Fuel type and efficiency should also be factored in to your purchase.

If you aren’t sure what type or size of tankless water heater is right for your Cheney home, call ACI Northwest to speak with one of our professional technicians. We are always glad to offer our expert advice so that you can meet all of your hot water needs in the most efficient way possible.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Tankless Water Heater Tip: How to Get the Right Size

Colburn Heat Pump Repairs: Common Problems

Friday, January 6th, 2012

In a perfect world, you would never have to worry about things like malfunctions or repairs of your Colburn home’s equipment. Everything would just work without ever needing to be maintained or fixed, and you could spend your time on energy on more enjoyable pursuits.

Unfortunately, no such perfect world exists. Things wear out and break down, often at the least opportune time. And of course, your heat pump is not immune. Despite being a great all around machine, a heat pump can malfunction, just like anything else.

But how can you know whether your heat pump is not working right? Here are some signs and symptoms that are often indicative of common heat pump problems:

  1. Too Much Noise – Whether emanating from your car or your usually quiet heat pump, noises are often the first sign that something is amiss. You should expect your heat pump to make some noise; the compressor and air handler are two culprits. However, if it starts making more noise than it did before, something may be up. Sometimes this is as simple as some loose fittings, but it’s still something that should be checked out.
  2. The House Is Too Cold – Obviously, if you get a heat pump to heat your house, you expect it to do just that. So, if your home is too chilly, you know something is amiss. If it’s way too cold, the heat pump may not be running at all, which can be the result of a serious malfunction. If it is only a few degrees below where you set it, it may be a different problem. It could be that something is malfunctioning in the heat pump, but it could also be that the outside air is too cold for the heat pump to keep the house warm. In that case, the best solution is supplemental heating.
  3. The Heat Pump Turns Off Too Soon – If your heat pump seems to be shutting off too quickly, it may be short cycling. That means that it is turning off before getting through its entire heating or cooling cycle. Frequently this is simply caused by dirt or debris around the outdoor coil, in the air handler or in the filter. Check these areas out and clean them. In general, you will want to keep the various components of your heat pump clean in order to ensure the best performance.

These are just some of the main symptoms of common problems. Other things can go wrong with your heat pump, although it is not very likely. As a general rule, if you notice your heat pump performing strangely or doing something it hasn’t done before, it’s best to get it checked out by a professional.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Colburn Heat Pump Repairs: Common Problems

How to Get the Best Heat Pump in Kellogg

Wednesday, January 4th, 2012

Everybody wants a good deal in Kellogg, especially when making a major purchase. People want their money’s worth. They want to feel like they got the best they could for the money they spent.

But how do you decide what the best option is, especially when choosing a product that you know little about, like a heat pump? The average homeowner does not spend a lot of time studying his heat pump or reading heat pump magazines for fun, so chances are you are not a heat pump expert. That’s understandable…but it doesn’t help you when you are trying to buy a new one and you want the best.

Fortunately, there some things you can look for to get clues about the quality of a heat pump and how well it suits your needs.

Efficiency is among the most important factors in choosing a heat pump. Because heat pumps can be used for both heating and cooling, they have two different efficiency ratings, one for each mode.

The heating efficiency for a heat pump is rated on a scale called the heating season performance factor (HSPF). This rating is actually the result of a calculation. To find the HSPF for a heat pump, the unit’s estimated heating output is divided by its energy consumption. Simply put, it’s the ratio of heat put out by the unit to the amount of power it draws. The higher the HSPF, the more efficient the heat pump is. To give a frame of reference, all new heat pumps are required to have an HSPF of at least 7.7. The most efficient units available carry an HSPF of 10.

The rating system used to convey the cooling efficiency of a heat pump is the seasonal energy efficiency ratio (SEER). This is a simple numeric value that rates how efficient the unit is. Many new heat pumps carry a SEER of at least 12, while the most efficient models rate between 14 and 18.

While efficiency is important, it is just one factor. More efficient units are also more expensive, so you will want to consider the upfront cost. The most efficient units will pay for themselves in savings relatively quickly, but the purchase price is still important. Be sure to weigh all the pros and cons when choosing a new heat pump for your Kellogg home.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How to Get the Best Heat Pump in Kellogg

Pros & Cons of Heat Pumps in Worley

Monday, January 2nd, 2012

When deciding on any major purchase for your Worley home, a critical step is to weigh the pros and cons. This helps you to decide on the best option and reach the best decision for your needs and preferences.

Installing a new heating system is a perfect example of a situation in which you would need to weigh pros and cons. There are a lot of options, and not all of them are right for all people. Take heat pumps, for example. They are great devices and serve many people extremely well as home heating solutions in Worley, but they are not without their drawbacks. Below are some of the pros and cons of heat pumps to help you decide whether a heat pumps if the way to go for you.

Pros:

  1. Inclusive – A heat pump not only heats your home in the winter but also cools it in the summer, thanks to a reversing valve that changes the flow of the refrigerant. Having one appliance for both heating and cooling can be very convenient.
  2. Energy efficient – Heat pumps are extraordinarily efficient when it comes to energy use. Because they simply move and distribute heat, rather than producing any on their own, they use minimal electricity.
  3. Simple – Operating on the same basic principles as your refrigerator or an air conditioner, heat pumps are relatively simple. More importantly, they simplify your life by putting your heating and cooling solutions in one package and running on electricity, so you don’t need any other fuels on hand.
  4. Inexpensive to operate – In addition to being energy efficient – which lowers your monthly energy bills – many heat pumps are eligible for federal tax credit. You can save a bundle by using a heat pump.

Cons:

  1. May need supplementing in cold climates – In climates where winter temperatures stay below 30 degrees Fahrenheit for a while at a stretch, a heat pump will have trouble keeping up and need to be supplemented.
  2. Don’t work in power outage – Obviously, because they are powered by electricity, a heat pump won’t work in a power outage, unlike some other heating solutions that do not require electricity.

Although the pros clearly outweigh the cons here, the cons are important as well. Carefully consider all these factors and more while deciding whether a heat pump is the solution for you.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Pros & Cons of Heat Pumps in Worley

Happy New Year’s Eve from Your Heating and Air Conditioning Contractor!

Saturday, December 31st, 2011

Happy New Years! We hope you have a great time tonight welcoming in the New Year and saying goodbye to the old. Forty-five percent of people make New Year’s resolutions; ours is to serve our customers even better than we did last year! If one of your resolutions is to make your home more green, remember that improving your insulation, sealing up any air leaks, and upgrading your HVAC system can have a big impact on your energy usage. A makeover for your house is great way to start off the year; it will make your home more comfortable and more environmentally friendly!

Continue Reading

Tags:
Posted in Services | Comments Off on Happy New Year’s Eve from Your Heating and Air Conditioning Contractor!