ACI Northwest Blog: Posts Tagged ‘Newman Lake’

What is Involved in Replacing an Old System in Colburn?

Tuesday, February 28th, 2012

When your HVAC system starts to fail in Colburn — or if it already has — your options essentially come down to two: replace or repair heating the system. There are a lot of factors that go into making such a decision, but in general, if it is a newer system with a small problem and you haven’t had much trouble with it, then a simple repair clearly makes sense.

For older systems, or ones that have been repaired all to often lately, or ones that seem to be on their last legs, repair may be the only reasonable course of action.

Surely you know that a total heating system replacement would be a big job, but have you ever thought about just how big? Sure, you know you will have to swap out the failing furnace, and you may as well replace the air conditioning unit while you’re in there, but that’s it, right?

Wrong. There is a lot more to an HVAC system than just those two machines. Think about all the behind-the-scenes components and the little components that are often overlooked, such as:

  • Ducts – Keep in mind that your ducts are probably as old as that furnace you are replacing, and that a new, efficient unit cannot operate at nearly its full potential with faulty duct work.
  • Thermostats – Your old ones may not even be compatible with a new furnace or air conditioner.
  • Wiring – For the thermostat, among other things.
  • Insulation – Many homeowners forget that insulation is part of an HVAC system, too. Just like we said about duct work, old insulation does not help a new system achieve maximum performance.
  • Piping – Such as refrigerant piping on a geothermal system or a ductless air conditioning system.
  • Furnace registers or ductless mini A/C units.

You can see that the job starts to get pretty complex pretty fast. This doesn’t mean you should shy away from a necessary replacement, just make sure that you fully consider the scope of what you need done, as well as the budget and time frame you have to work with.  Please call ACI NW with any questions.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on What is Involved in Replacing an Old System in Colburn?

Heating Installation Guide: What to Expect in a Low, Medium or High Efficiency Furnace

Wednesday, January 11th, 2012

When buying a new furnace in Deer Park, you have many options. You can purchase a low end model to save money up front and you’ll still get exceptional fuel efficiency, but as you go up the scale, more innovative, money saving features become available. Here is a brief look at what you can expect based on which type of furnace you purchase.

Low Efficiency Furnace

This is a bit of a misnomer as even entry level furnaces have efficiency ratings of at least 80%. For comparison, if you’re still using an old gravity furnace, your efficiency rating could be lower than 50%. Modern furnaces are built to conserve, and while you won’t receive all of the bells and whistles that tend to accompany high efficiency models, you will get a durable, affordable furnace that will last a long time.

Medium Efficiency Furnaces

Furnaces in the mid-efficiency range have AFUE ratings of between 85% and 92% and are therefore significantly better than those in the entry level range. They also have some of the higher end features available in high efficiency models like programmability and the option for zone control. Because they are still mid-range, they are affordable without skimping too much on features too – a must for any homeowner wanting to save money on both ends.

High Efficiency Furnaces

The highest efficiency furnaces on the market are very different from those you would have purchased even just 10 years ago. Top end furnaces can carry AFUE ratings of up to 95% with a boat load of added features to conserve energy. These features include two stage gas valves so you can maintain a low BTU heating system for most of the year but crank up the heat when the temperature outside drops too low. They are also programmable, which allows you to easily change the temperature settings, fan speed and more from anywhere in the house.

And while they cost more to install, high efficiency furnaces use less energy over their lifespan, last longer and are more environmentally friendly than any other furnaces on the market in Deer Park today.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Heating Installation Guide: What to Expect in a Low, Medium or High Efficiency Furnace

The Beauty of Zone Heating: A Tip from Furnace Contractor

Monday, November 28th, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Cheney home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on The Beauty of Zone Heating: A Tip from Furnace Contractor

When to Upgrade Your Circuit Box: A Recommendation From Chattaroy

Monday, August 29th, 2011

How many people remember what it was like to go on a “fuse search” when a major appliance stopped working? If you lived in or owned an older Chattaroy home, you know what that meant – a blown fuse was a nuisance.

The first types of electricity control were fuses, installed in a main fuse box (or secondary box) which connected the incoming electrical current to separate circuits. Most major appliances like refrigerators and stoves had their own separate current and fuse.

Eventually these fuse boxes were replaced with panels containing circuit breaker panels, which contained circuit breakers instead of fuses. So instead of replacing a fuse when a major appliance or circuit goes down, all that is needed is a flip of the breaker switch back to the “on” position.

Circuit breakers are considered safer and have greater capacity to control current to many of the newer, electricity-consuming appliances such as microwaves and wireless routers, to name a couple. And flipping a switch is much more cost-effective than having to buy replacement fuses, too.

While it is not mandatory for homeowners to replace fuse boxes with circuit breaker panels, it is often a good idea to make the change, especially during a home remodeling project. Doing it “all at once” is a good idea since walls are usually torn up and appliances are being replaced. Before the dust settles on the project, it is logical to install a breaker panel. Better to disrupt everything at once than to go back later and disrupt everything again.

Another reason to install la new circuit breaker panel is because of necessity. Circuit boxes are rated by amperage (amps) – a measure of electrical capacity. For example, older boxes may be rated for 60 amps and newer homes could have boxes rated 200 amps or higher. This bigger demand for power can overload older circuits. And appliances can constantly be popping a circuit or blowing a fuse. In that case, it might be a good time to consider changing to a new circuit breakers panel.

According to www.acmediy.com, there is a checklist of things to consider when installing a circuit breaker panel, including:

  • Determine your load requirements,
  • There may be a need to add new wiring or circuits,
  • Wires coming into your home may have to be upgraded,
  • Old wiring may need to be replaced.

Should you do it yourself? If you have the experience and skill to do so, installing a circuit breaker panel is doable. If not, a qualified, skilled electrician is the person to call. It will cost extra but consider it “peace of mind.”

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on When to Upgrade Your Circuit Box: A Recommendation From Chattaroy

Energy Efficient Home Cooling Tips From Otis Orchards

Monday, August 15th, 2011

Having an energy efficient air conditioning system in place is a great way to keep cool in the summer for less in Otis Orchards. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough maintenance on your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Energy Efficient Home Cooling Tips From Otis Orchards