ACI Northwest Blog: Archive for November, 2011

Why You Should Have Your Furnace Serviced Every Heating Season in Colburn

Monday, November 7th, 2011

Particularly if you’ve just purchased a new furnace for your Colburn home, maintenance is  probably not something you think about all that much. As long as it works when you need it to, that is. Unfortunately you usually find out that something is wrong with your furnace just when you need it most. However, there is a way to avoid that kind of problem, and many others, and that’s to have regular maintenance service performed on your furnace by a home heating professional every year.

One of the main reasons to have your furnace serviced is that it allows technicians to catch small problems before they become large ones. During a typical maintenance visit, a technician will examine all parts of your furnace to ensure that they are still in good working order. He’ll also thoroughly clean out the unit to make sure there are no buildups of debris that could cause problems or impede the furnace’s energy efficiency.

And if they do find something wrong like a part that’s beginning to wear out or something that just isn’t working properly, the technician can make the necessary repairs right away. You can get the problem taken care of ahead of time and you won’t have to worry about going without heat during the coldest part of the winter.

That’s not the only reason that annual maintenance is important and beneficial, however. It can also help you save money, both on your monthly energy bills and in the long term. That’s because annual maintenance tune ups keep your furnace functioning at peak efficiency levels longer than they would be able to otherwise.

A typical furnace will lose a small percentage of its energy efficiency every year, and while it won’t seem like a lot at first, that can really add up over the course of a couple of years. With regular maintenance, though, you can often maintain up to 95% of your furnace’s original efficiency for the life of the furnace.

Plus, when the proper maintenance and service is performed on a regular basis, your furnace will simply last longer. Most furnaces purchased now will last between 10 and 15 years, and with proper care, you can help to ensure that your furnace reaches the upper limit of this span or even beyond.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Why You Should Have Your Furnace Serviced Every Heating Season in Colburn

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Friday, November 4th, 2011

If the temperature in your Cheney home is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Furnace vs. Heat Pump: A Tip from Sagle

Wednesday, November 2nd, 2011

If you’re preparing to replace your existing Sagle home’s heating system, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have, and they can be expected to last anywhere from 15 to 25 years when properly maintained. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Furnace vs. Heat Pump: A Tip from Sagle