ACI Northwest Blog: Posts Tagged ‘Otis Orchards’

Heat pump maintenance, the right way

Wednesday, February 1st, 2012

Heating and cooling your Spokane County home is a priority. You need your home and family to be comfortable all year round, so you either got or are considering a heat pump. These machines are great because under the right circumstances, they are essentially all-inclusive and incredibly efficient solutions for all your home heating and cooling needs.

Notice the “under the right circumstances” part. A number of things have to be considered when choosing a heat pump, such as the climate and the size of your home. But these are not the only circumstances that influence how well your heat pump works for you. Proper heating system maintenance is a vital component of heat pump ownership, ensuring that you get the best performance out of your heat pump for the longest time possible.

A major part of properly maintaining any machine is to keep it clean. A heat pump is no exception. Dirt and dust can affect the efficiency of your heat pump, as well as speed up corrosion problems. Keep the compressor and coils clean. Check them monthly or so and remove any accumulated dirt. Also, consistently check and change filters according to the manufacturer’s recommendations.

Simple cleaning is an easy and effective first step to heat pump maintenance, but there are some things that you just won’t be able to do on your own. For more intensive maintenance, it is best to call in a professional for an annual inspection.

During a routine maintenance check of your heat pump, a technician will inspect the whole heat pump system for problems. He will clean the compressor and coils, tighten any connections that may have loosened up and change the filters as needed. In addition, a skilled technician will be able to detect any early signs of trouble and make necessary repairs to prevent break downs. These small repairs can prevent big problems later on, thereby preventing some serious discomfort and a possible big expense.

If you are considering a heat pump as a heating and cooling solution for your home, great. If you have already decided on one and had it installed, congratulations on making a smart decision. Now, make another smart decision to protect that investment by keeping your new heat pump properly maintained.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Heat pump maintenance, the right way

A Question from Valley Ford: Why is My Furnace Turning On and Off?

Monday, December 26th, 2011

One of the most annoying things your furnace can do is to constantly keep turning on and off. This on-off cycling keeps your Valley Ford home from heating up properly. This action – called short cycling – also requires more electricity and drives up utility bills.

Short cycling is caused by an overheated furnace, which triggers safety mechanisms and shuts down the furnace. After a brief interval and cooling down, the furnace starts up again the cycle keeps repeating itself. Not only is it an annoyance, it can also signal more serious problems. A leaking heat exchanger can cause a furnace to overheat – and produce deadly carbon monoxide gas.

If a furnace is working too hard and overheating, it is usually because of airflow in and out. Your home’s ventilation system needs to be clear of dirt, dust, and debris. The more blockage in your ductwork and vents, the more friction is created, slowing down airflow and ultimately ending with an overworked furnace that continues to cycle on and off. And a blocked exhaust vent, such as a chimney or dedicated exhaust vent, can also cause a furnace to work harder. Check for things like leaves or bird’s nests.

The blockage may also be coming from a clogged furnace filter. You should clean or replace your furnace filter after a visual inspection reveals any type of build-up of dust or dirt. Do this at least every three-six months.

If you have a two-speed fan on your furnace, it is recommended that you run the fan in low speed during the cold months and high speed in the warm months. The reason? Warm air is lighter and takes less force to move.

There are other measures to take to prevent short cycling but these usually require a professional heating and cooling service technician to correct the problem. If in doubt, call your local heating and cooling contractor and schedule a furnace inspection. Don’t make your furnace work any harder than it was designed for – and keep your home’s occupants comfortable and safe.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on A Question from Valley Ford: Why is My Furnace Turning On and Off?

Things to Look for When Buying a Heating System: A Guide from Airway Heights

Wednesday, November 16th, 2011

If you are in the market for a new or replacement heating system in Airway Heights and don’t know much about heating systems, you are not alone. Many homeowners are in the same boat as you. And many of that number put their trust in their local, professional, and qualified heating and cooling contractor to find the right furnace for their homes.

Before calling for an estimate, there are some things you can do to “prepare” yourself for one of the most important purchase you can make. Here is a checklist of things you should look for when buying a heating system.

  1. Know your energy alternatives. There are lots of options today when it comes to heating your home. Gone are the days when the choices were so cut and dried. Check with your heating and cooling contractor for suggestions.
  2. Know what size your furnace should be. Furnaces are not “one size fits all.” The size of the furnace is determined by its Btu (British thermal unit) rating. For example, a one-story ranch home on a crawl space requires less heating capacity than a two-story colonial with a basement, thus it would require a furnace with a smaller numbered Btu rating. A home with a great deal of heat loss through windows and doors may require various furnace sizes. And don’t forget about insulation. Insulation can affect the furnace size, too. Again, check with your heating and cooling contractor for recommendations.
  3. How much room do you need for your furnace? Some homes have mechanical rooms for furnaces and water heaters while others utilize attics, basements, or crawlspaces for furnaces. If you think you need a big furnace to heat a big home, think again. Furnace manufacturers have been downsizing their heating equipment for years, while maintaining the same heating capacities. One example are wall hung boilers, which utilize water and electric as heating sources and are installed on a wall, making the unit easy to locate and easy to service – while at the same time being off the floor and out of the way.
  4. Will your heating system be “plug and play?” New furnaces can take the place of the ones they are replacing by using the same space. But sometimes a replacement unit may need some altering to fit into an existing duct system. It is almost a given that a new plenum (the part attaching the furnace to the ductwork) will have to be fabricated. But the new furnace may also require some other modifications to an existing duct system. You should understand this ahead of time and be prepared to pay additional costs.
  5. A box is a box is a box. As a rule, most heating systems are made the same. In some cases, one furnace manufacturer may produce several different brand names. The best “brand” is the heating and cooling contractor who installs and services your heating equipment. Do your homework ahead of time and find a qualified and professional contractor. Ask friends and family for recommendations. This is may be the most important thing to look for when buying a heating system

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Things to Look for When Buying a Heating System: A Guide from Airway Heights

No Heat in the House? Things to Check and Do: Some Pointers from Colbert

Friday, October 21st, 2011

In general, when your heating system stops working, you’ll need to call a Colbert professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.

Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.

Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.

However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.

If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on No Heat in the House? Things to Check and Do: Some Pointers from Colbert

Variety of Ways to Cool Your Home Naturally

Wednesday, August 24th, 2011

It is normal these days to simply switch on the air conditioning when the temperature begins to rise outside in Spokane. But this can get expensive quickly, so it is a good idea to look into some alternative cooling methods as well. Fortunately, there are actually some great ways to help keep your home cool without touching that air conditioning at all. You will probably still want to have it around for extreme circumstances, but the less you need to use it, the more you will save in the long run.

Using fans, ceiling fans in particular, can certainly help to keep you cool on many moderate summer days. But they are far from the only options available. In fact, the design and composition of your house itself will have a lot to do with how easy it is to keep it cool all summer long.

One of the main reasons that your house gets so hot inside during the summer is that sunlight heats the air inside when it hits the walls, roof and windows. Closing your blinds will help to keep some of this out, but there will still be plenty of heat from the sun working to increase the indoor temperature.

What you really want to do to keep your house from heating up because of sunlight is to actively reflect the sun’s rays away from your home. You can do this by having light colored roofing and exterior paint or siding put on. While the dark colors typically used for this type of work absorb the vast majority of the sunlight that hits them, lighter colors will reflect it away.

This works well for the walls, but on your roof it can be a bit more difficult to stop the absorption of heat from the sun because of the nature of typical roofing materials. What you can do, however, is add a reflective coating like white latex on the roof. This will dramatically reduce the amount of heat that is able to come into your home in this way.

Also, natural shade can do a lot to keep sunlight from getting to your home to begin with. Planting trees close enough to your home that they will block out the sun but far enough away that they have room to grow will eventually help to keep your home much cooler without any extra work whatsoever. For more energy saving tips, contact your local AC contractor.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Variety of Ways to Cool Your Home Naturally

Energy Efficient Home Cooling Tips From Otis Orchards

Monday, August 15th, 2011

Having an energy efficient air conditioning system in place is a great way to keep cool in the summer for less in Otis Orchards. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough maintenance on your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Energy Efficient Home Cooling Tips From Otis Orchards

Window and Through Wall Units – Benefits and Disadvantages in Colburn

Friday, August 5th, 2011

When you’re trying to decide what type of air conditioner to get for your Colburn home, you’ll first have to determine whether a central air conditioning system or smaller individual unit is best for you. These smaller air conditioners are generally installed either in a window or through the wall of your home, and they can provide excellent cooling under the proper conditions.

If you’re still on the fence about what type of air conditioner is right for your home, here are a few items to consider:

  • Ducts – If your home already has ductwork installed for a central forced air heating system, it should be relatively easy to hook up a central air conditioner. But if there are no ducts currently in place, your installation costs will be a lot lower with window or wall mounted units.
  • Portability – Most window units are designed to be removed and stored at the end of the summer, so you can have your windows back and not have to look at that unit all winter long. Through wall units aren’t generally removable, but because they don’t take up window space and provide a more thorough seal against the elements, that’s not as much of a concern.
  • Aesthetics – With both window and through wall units, you’ll have something protruding into your room at least a few inches. These types of units are hard to hide, particularly when compared to the simple air ducts that central air conditioning systems use.
  • Flexible Sizing – No matter how big or small your room is, you should have no trouble finding a window or through wall unit to match it. A central air conditioning system needs to be sized to fit the entire house. If you’re only inclined to use air conditioning in two or three rooms during the hottest months of the year, you may not want to pay to cool the entire house all of the time. Smaller units provide that type of flexibility.
  • Affordability – Installing a central air conditioning system, even if you already have ducts in place, is a large undertaking and likely to cost you several thousand dollars up front. On the other hand, small window and through wall air conditioners are available for as little as $200 and you can buy more whenever you’re ready to spend that extra money. You can also usually install a window unit yourself, and the cost of having a through wall unit installed is minimal compared to that of a central AC unit.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Window and Through Wall Units – Benefits and Disadvantages in Colburn