ACI Northwest Blog: Posts Tagged ‘Laclede’

Geothermal Heating for Homes in Mead

Tuesday, May 29th, 2012

It’s no secret that use of alternative energy sources is on the rise. Solar panels, windmills and hybrid cars have been heavily publicized over the past several years as people and governments try to employ energy strategies that are more efficient, friendlier to the environment and more cost effective.

One alternative energy option that you may have overlooked amid the press that the above topics have received is geothermal heating for homes in Mead. That is, using the existing energy of the Earth as a means to heat and cool your home.

If you have in fact been unaware of geothermal heating and energy thus far, it is rapidly growing in popularity as an alternative energy source. According to an article in GOOD Magazine, there are projects currently underway that would double the United States’ capacity to produce electricity from geothermal energy. In the summer of 2011, the U.S. Congress approved $70 million in funding to research geothermal energy.

It’s not just the government getting in on the act, either. Some contractors report anecdotally that over the past five years or so, demand from customers for geothermal heating installations has risen noticeably.

What’s all the fuss about? Well, for starters, geothermal heating can lower heating costs dramatically by reducing reliance on electric or fuel-based heat. Anyone that has received a staggeringly high home heating bill knows that any relief would be welcome.

Additionally, geothermal heating has the advantage of being hidden from sight. Unlike solar panels that have to be mounted on your home or a towering windmill that dominates your property, geothermal pipes run underground. Once they’re installed, no one even knows they’re there.

It’s not all great news about geothermal. You’ll need some extra land to house the underground coils, and the cost of installation is usually higher than other heating systems.

So, geothermal may not be for everyone, but if you are looking for an alternative energy solution, you have some land and you can invest some money upfront to see savings each month, then it might just be for you.

For more information, give COMPANY NAME a call today!

Continue Reading

What are UV Germicidal Lights and When Should I Install Them?

Monday, April 23rd, 2012

Ultraviolet germicidal lights are lights that improve indoor air quality in your home by killing the harmful bacteria, viruses, and toxic mold that can cause respiratory problems and other health concerns. These microorganisms spread by releasing airborne spores containing the genetic material used to create a new organism. UV lights use a wavelength of ultraviolet light to destroy the organism’s DNA, which takes away their reproductive capabilities and also kills them.

UV germicidal lights are fairly inexpensive and can be installed to work with your existing forced air heating system. They are typically used in tandem with either an electronic or mechanical air cleaner. While air cleaners can filter pollen and other irritants, UV germicidal lights destroy the viruses and mold spores once these pollutants have been trapped by the air cleaner. After the air has been filtered through your HVAC, it will circulate more easily through system and increase the efficiency of the unit. In addition, UV lights are useful in killing hidden mold growth, which can only be detected by special thermal imaging equipment.

Homeowners with particularly chronic allergy problems or extremely poor indoor air quality choose to install both types of air cleaners, in addition to a UV light, for the ultimate protection from indoor air pollutants—from bacteria to pet dander.  If your home lacks adequate ventilation, or if you are unable to control the source of common pollutants, you might benefit greatly by installing UV germicidal lights. Poor indoor air circulation can exacerbate the spread of harmful microorganisms, so make sure you have proper ventilation if you don’t have UV lights in your home.

UV germicidal lights have also been used to filter tap water because they are more reliable and easier to install than other water treatment systems. However, they are typically used to provide cleaner indoor air.

Call ACI Northwest if you have questions or concerns about the quality of the air inside your Spokane home.

Continue Reading

Why Routine HVAC Maintenance Improves Indoor Air Quality

Monday, April 9th, 2012

Furnaces and air conditioners in Post Falls are by far the most common way to circulate air throughout homes, offices and institutions, heating in the winter months and cooling in the summer.  Adjust the thermostat and controlled air is delivered almost immediately.

If a system is not regularly and properly maintained, however, that air can be dirty, dusty and full of odor, having passed through the heat exchanger, filters and ductwork that have accumulated a build-up of residue over time.  IAQ or interior air quality quickly deteriorates.

The Basics

HVAC systems heat or cool air at a central point, often a furnace in the basement.  The air passes through filters to sift out dust and unwanted particles, then travels through a system of ductwork to be delivered to the space.  Return air ducts bring it back to the central point.

Along the way, the air accumulates the dust, germs and debris of the places it inhabits.  Over time, the filters become clogged and eventually contribute more contamination to the processed air than they can clean.  The enclosed and hard to reach ducts are also deposits of dust and decorated with spider webs that are quickly another form of filter that gives back more than it receives.

The Costs

Without routine maintenance, the system runs poorly and distributes more dirt into the living space than it is able to filter and clean, reducing the quality of life for the inhabitants, homeowners, businesses and customers.  Poor air quality can lead to serious health issues as well as the loss of time and productivity.

Not only does the quality of the air decrease, the strain on the system lowers efficiency.  Having to work harder consumes more energy, creating an immediate and noticeable rise in utility bills.  The stress also reduces the lifetime of the system and requires more rapid replacements of parts or the entire furnace, a huge financial cost.

Regular Maintenance is the Easy Solution

To maintain high levels of quality air, it is essential to schedule regular replacements of filters and a clean-out of the ducts.  The filters are accessible as part of the furnace and air conditioners and easily swapped out by the home owner once or (better) twice a year.

Ductwork, however, is enclosed and often out of site, just as easily out of mind and certainly harder to reach.  Calling ACI Northwest and scheduling a duct-cleaning along with an inspection and routine maintenance of the entire system with a licensed company ensures longevity and efficiency along with peace of mind.

Continue Reading

What You Need to Know About Water Heater Leaks

Thursday, March 22nd, 2012

In Cheney a leak in your water heater can be a big or small problem depending on where the leak is, how severe it is and whether it requires repair or replacement. Here are some things you should know about tank water heater leaks that will help you determine who to call and how to act.

Where Is the Leak?

Step one is to determine where the water is coming from. Look for leaks around the fittings and valves attached to the device. If one of them is loose or if you see water dripping from a connection, it can probably be fixed relatively easily. However, if the leak is coming from the body of the water heater, you may have a ruptured tank which is a sure sign of a bad water heater that needs to be replaced.

Draining Your Tank

Once you identify the leak, turn off the water supply to the tank and prepare to drain it the rest of the way. You should also disconnect the power from the device. If the water heater is gas, I recommend you call a professional who is certified to work on gas appliances. For electric water heaters, you may still want a professional, but the next step here is to simply turn off the breaker to stop electricity from flowing to the device.

Drain the tank next, using the bucket to capture the water as it is released. If you have a floor drain and can angle the tank over the drain, go ahead and do that now. Once the tank is empty, it is time to tighten your fittings.

Fixing the Problem

Assuming this is a fittings or valve problem, loosen any fittings that appeared to have leaked, repair the plumbing thread and retape the pipes, finally tightening the fittings back into place. The pressure valve may need to be replaced as well – do this now if it is necessary.

Before reapplying the electricity to the water heater, reattach the water supply and turn it on to check for leaks. If it holds water, you are lucky and your water heater’s tank isn’t leaking. Reattach everything and turn it back on.

If you notice the leak continues, you should call ACI Northwest, as it is likely the glass inside your tank has cracked or is leaking. Most of the time, this cannot be repaired and means you need a new water heater installed.

Continue Reading

Sagle Heating Replacement Tip: Signs of an Oversized Furnace

Wednesday, January 18th, 2012

Most people in Sagle, when they choose a new furnace, think that “bigger is better”. However, an oversized furnace can present just as many if not more problems than an undersized furnace. So, if you feel you may have overdone it in the past or you want to avoid making a mistake in the future, here are some signs that your furnace may be oversized.

Short Cycling

The most common sign of oversizing is short cycling. Short cycling occurs when your furnace turns on and off frequently because it reaches the thermostat setting so fast. Basically, your furnace is so powerful that it can produce what you need rapidly and then shuts off. But, because it does this, the temperature in your home is likely to cool much faster as well since the furnace isn’t on all the time.

Additionally, the on and off short cycling has a negative effect on your furnace, causing excess wear and tear on the system and eventually leading to extra repairs and in some cases early replacement.

High and Low Temperatures

When your furnace is turned on for a comfortable indoor temperature like 70 degrees F, the high and low temperature between cycles should be relatively close to that temperature. In an ideal situation, you shouldn’t even notice a fluctuation.

So, if the high temperature gets close to 75 degrees F and the low temperature is around 66 degrees F, you have a furnace much too large for the size of your home.

Furnace Room Issues

You might find that the space and exhaust given for the furnace are not sufficient either, especially if your previous furnace was replaced with this oversized unit. Backflow of a gas or oil smell or excess heat in and near your furnace room are both common signs that the furnace is much too large.

So, what should you do about your oversized furnace? If you have had that furnace for some time or just moved into a new home, it’s a good idea to have a new one installed. Have a proper load calculation done and then get a new furnace installed so you don’t have to worry about the system cycling on and off so often. If it’s a newer unit, call your Sagle heating technician and discuss possible options to reduce the negative effects of the miscalculation of its size.

Continue Reading

What Size Furnace is Right for My Home? A Question from Pinehurst

Friday, November 11th, 2011

When it comes to your Pinehurst home’s heating equipment, the right size is very important. If your furnace is sized correctly, you will enjoy a high level of indoor comfort. However, an incorrectly sized furnace may result in many cold spots in your home, an overworked furnace, or higher utility bills.

An undersized furnace will turn off and on frequently, which is called short cycling. Short cycling can lead to moisture in the system, causing less efficiency and damage to equipment from accumulating moisture in the heating system. The constant cycling adds to wear and tear on equipment, too. An oversized furnace may not be able to keep up with the demand for heat during the coldest days. The furnace may be constantly running and unable to keep up – adding to higher utility costs. So size really does matter when it comes to selecting the right heating equipment for your home.

But a big furnace does not mean it is right-sized. Have you ever seen a “five-way” gravity furnace? It was manufactured in the mid-1900’s and took up a lot of room – as much as half of a basement – while being extremely inefficient. The key here is efficiency. A furnace that works right is sized to the space it is heating, which does not include attics, crawlspaces, or uninsulated rooms (porches, mud rooms, etc.).

A furnace must make efficient use of its Btu’s, which is abbreviated for British thermal unit. Btu is used to measure a furnace size. Furnaces are often rated by input Btu, which is the amount of energy consumed when running. The output Btu may be different based on the system. And output Btu is the best way to select a furnace, since this is the actual heating capacity.

When sizing a furnace, the first thing to do is to determine the inside space that will be heated. If you are looking to heat your home, you can measure the square footage of each room (multiply width by length). The rooms should include bathrooms and hallways but exclude attics and crawlspaces. Add up the totals and match up the Btu output to the total square footage. If you aren’t sure of your calculations, call a qualified heating and cooling contractor.

There are many factors that go into heating a home and today’s energy efficient furnaces give homeowners many more choices. Whatever furnace you choose to purchase, make sure you do your homework and hire a qualified professional HVAC contractor to determine the best size furnace for your home.

Continue Reading

Did You Change that Furnace Filter?

Wednesday, November 9th, 2011

No matter what type of furnace you have, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require a Hayden professional‘s help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a professional come out and complete the necessary repairs.

Continue Reading

How Effective is Geothermal Heating? A Question From Cocolalla

Wednesday, October 5th, 2011

Geothermal heating is an efficient way to use the Earth’s natural resources to heat a building’s interior in Cocolalla. But is it an effective way? Of course.

Consider the cost of geothermal heating. Once you get past the initial installation costs of a geothermal heating system, which are higher than other conventional heating systems, its operating costs are much lower because of its use of a natural, renewable heat source – the Earth. If you plan to stay in your home for many years, a geothermal heating system will likely pay for itself because according to International Ground Source Heat Pump Association, geothermal operating efficiencies are 50-70% higher than other heating systems, which represents a substantial lowering of energy costs.

And according to a leading electric utility company, the cost of electricity for operating a geothermal heat pump is lower than any other heating system which includes natural gas, propane, and oil.

Beyond lower energy costs, geothermal heating leaves a smaller carbon footprint than other heating systems. According to the U.S. Environmental Protection Agency, carbon dioxide (CO2) emissions from the average U.S. home is 17%, most of which comes from burning fossil fuels for electricity. Geothermal uses natural heat from the ground and therefore uses 30-60% less energy than more conventional heating and cooling systems. Using less energy equals less carbon dioxide production.

A geothermal heating system is only as effective as the equipment used to deliver it throughout the building. The most common delivery method is through a ground source heat pump. This pump pulls the heat from the earth and distributes it. When properly installed and maintained, a ground source heat pump can last 15-20 years and provide an excellent source for heating – and cooling.

The components of a geothermal system also include a compressor, air handling unit, and duct system. When all are installed and maintained correctly, a geothermal heating system will be just as effective in heating a building’s interior as any other heating system. Just be sure you hire a qualified heating and cooling professional to install and service your geothermal heating system.

Continue Reading

What Is Forced Air Heating? A Question From Cocolalla

Wednesday, September 28th, 2011

Chances are that you’ve heard the term forced air heating in Cocolalla before, particularly if you’re in the market for a new home heating system. But what does that actually mean? The truth is that if you’re asking this question, you’re not alone. There are so many types of home heating systems out there that it’s common to be a bit confused and overwhelmed by it all.

The truth is that a forced air heating system is simply a heating system that distributes heat throughout your house using air to carry it. In this type of system, heated air travels through a system of ducts and is expelled through vents into the different rooms and areas of your home in order to maintain a particular temperature. That temperature, of course, is whatever you set your thermostat to, and when the desired temperature is reached, the heat will shut off until the temperature drops down again.

The main difference between the different types of forced air heating systems is the type of equipment that heats the air. For instance, you could have a gas furnace or a heat pump. Both of these are capable of heating air, and when paired with a fan, blower or air handler, can distribute heated air throughout your home.

Many forced air heating systems are remarkably energy efficient and can effectively keep you home comfortable all winter long. Additionally, they are generally made to be incorporated with central air conditioning systems for year round temperature control. Heat pumps are especially convenient in this way, as they’re able to both heat and cool your home depending on the season and your home comfort needs.

Continue Reading

The Preventative Maintenance That Will Save You the Most: A Guide From Laclede

Friday, September 23rd, 2011

Having a high performance, energy efficient HVAC system will save you a good deal of money in terms of your monthly heating and cooling bills in Laclede. But that efficiency will not last unless you also take the necessary steps to keep your equipment in good working order. While regular maintenance visits from a professional HVAC technician are an important part of this, there are also several things you can do on your own to keep your equipment running at peak efficiency.

  1. Keep it Clear – The first thing you should do is to make sure that there is plenty of space cleared around your outdoor unit. Whether it is the condenser and compressor for your air conditioning system or part of your heat pump, that outdoor equipment needs to have plenty of space to vent hot air. Also, the space will mean that debris is less likely to develop inside the unit.
  2. Clean the Condensing Coil – While your technician will do this when they make their annual visit, it is best to clean your coil more than just once a year. Just make sure that the power is turned off to your unit before you begin. This will help the unit cool air more efficiently and can prevent a whole host of other problems from developing.
  3. Check on the Blower – If your blower is not working right or the blade is clogged, your HVAC unit will not work properly. Make sure your blower fan is free of all debris and that is turns freely once you have cleaned it. If you are still having a problem with it, you may have to call a technician for repairs. Cleaning the blower out on a regular basis, however, should keep this from becoming a problem you need a professional for.
  4. Air Filters – You should also make sure you change your air filters regularly. This can help to keep your indoor air clean and healthy and it will also enable your HVAC system to run more efficiently.
  5. Clean it Out – Clean out any debris that you can reach from any part of your system. Just make sure any time you work inside your HVAC system that you have all of the power turned off. Anything from leaves to dust can get in there and cause a problem if it is allowed to build up over time. As long as you are on top of things and keep to a regular schedule of maintenance, none of this should take you very long.

Continue Reading