ACI Northwest Blog: Posts Tagged ‘Energy Efficiency’

Bayview Heating Tip: Most Energy Efficient Upgrades for Your Home

Friday, January 27th, 2012

Before you decide which upgrades will make your Bayview home more efficient, it would be best to get a home energy audit. You can do this yourself with a few simple tests, or you can hire a professional auditor. The auditor will use advanced equipment and techniques, such as blower doors and infrared cameras, to detect air leaks and places that need more insulation.

When your home is properly insulated and sealed, here are some upgrades you’ll want to think about to make your home more efficient.

High-Efficiency Furnaces & Heat Pumps

If you have an old single-stage furnace, it is time to upgrade. These furnaces were designed to run on two settings—either off or on, and when they are on, they run at full speed. Not only do they lose heat this way, but they also take longer to warm up your home. The new two-speed and multispeed models run at lower speeds to maintain a constant temperature. You can also buy ones with variable-speed blowers that operate on various speeds, which are the most efficient. Heat pumps are a good option if you need both heat and A/C in your home. While most heat pumps are manufactured to be efficient by design, the newer models are the most efficient way to heat and cool your home. If you have a heat pump older than 15 years, talk to an HVAC technician about a heat pump replacement.

Tankless Water Heaters

Tankless water heaters heat your water with individual units located near hot water applications. You also have the option of installing a single, whole-home tankless water heater, or for appliances that use more hot water, such as dishwashers and washing machines, you can install tankless models just for their use.

Water-Saving Toilets & Low-flow Plumbing Fixtures

Duel flush, or water-saving toilets are an excellent choice for an upgrade if you want to save water. These toilets use less water overall, and you have the option of using more or less water each time you flush. Installing low flow faucets and fixtures can also provide up to 60% in utility savings. Low flow plumbing fixtures reduce the flow rate for each fixture or application, which reduces the overall amount water used in the home. These are a good option if you’ve installed a tankless water heating system. Your tankless water heaters will be more efficient if the sum of the flow rate total for every fixture in the home is lower.

Continue Reading

How to Make Your Heating System More Energy Efficient: A Tip from ACI Northwest

Friday, November 18th, 2011

Efficiency is what you want when it comes to heating your Coeur d’Alene home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices is to have a furnace that uses less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system. You may need to remove the ventilation grilles to take a closer look. Wiping down the inside of your duct work or vacuuming the duct work with a hose attachment will often do the trick.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a maintenance plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller “carbon footprint.” Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more “green” profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter. You can take that to the bank.

Continue Reading